Each of the face shield units will come disassembled, packaged in a transparent plastic bag as shown in figure 1. There are 3 parts to each unit – the plastic headband that sits on the wearer’s forehead, an elastic band that goes behind the wearer to hold the unit in place, and a transparent plastic face shield. Included in the bag is also a sheet of paper with a QR code. Scanning the code will take you to the instructions.
Open the bag and remove the parts along with the sheet containing the QR code. Scanning the code will take you to the website where instructions are posted. Please see figure 2.
Across the front of the headband are 4 pins. These 4 pins align with the 4 perforations in the transparent face shield. At the end of each headband is a hook. The elastic band goes over the hooks to hold the unit in place. Note: There are two models of the headband, one with a thicker band. However, assembly for the two models is the same.
Hold the headband in one hand and starting at one end of the band, place the first perforation over the first pin. Then carefully continue along the band, placing the perforations over the pins. The pins on either end are angled to the side (please see Figure 3) so as to better
To place the final perforation, pull gently on the top of the face shield while gently straightening the last pin. The face shield will then snap into place.
To hold the face shield in place, place the headband on your forehead, bring the rubber band behind the back of your head, and place it over the hook on the opposite side of the headband. The headband can be tightened by tying a knot in the rubber band.
Figure 4 and 5 show the fully assembled face shield.
Description and assembly video instruction
These are not FDA-regulated medical devices, and have not been manufactured to the same degree of sterility as face masks or other items that directly interface with mucous membranes. Klarrio US LLC and all of its related affiliates and partners make no claims regarding the safety and efficacy of the PPE in preventing any disease or illness, including, but not limited to COVID-19. In utilizing the face shield donated by Klarrio US LLC, you are voluntarily electing to use the face shield. As such, you are releasing, waiving, and discharging releases from any and all liability, claims demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by any individual or organization. ↩︎